How to Link BrosTrend Extender to Optimum Router (Step-by-Step Guide)

If you’re looking to extend your Wi-Fi coverage at home, the BrosTrend WiFi extender is a solid solution. It helps eliminate dead zones and boosts your internet range throughout your home. In this guide, we’ll walk you through the process of linking your BrosTrend extender to an Optimum router using both WPS and manual setup methods.

Step 1: Check Optimum Router Settings

Before connecting your extender, make sure your Optimum router has WPS (Wi-Fi Protected Setup) enabled—this makes the setup process much easier.

How to access Optimum router settings:

1. Connect your computer to the Optimum router via a LAN (Ethernet) cable.

2. Open any web browser and type 192.168.1.1 in the address bar.

3. You’ll be prompted to log in—use your admin username and password.

4. Once logged in, check your router’s WPS status and wireless settings to ensure it's ready for the extender connection.

Step 2: Unbox and Power On the BrosTrend Extender

The BrosTrend extender box includes the extender itself, a quick start guide, and setup instructions.

Here’s how to get started:

1. Plug the extender directly into a wall outlet near your router.

2. Press the Power button to turn it on.

3. Wait for the LED indicators to stabilize before proceeding with setup.

Step 3: Connect BrosTrend Extender to Optimum Router

There are two methods to connect your BrosTrend extender to the Optimum router: WPS and LAN cable.

Method 1: WPS (Recommended)

1. Turn on both the router and the extender.

2. Press the WPS button on your Optimum router.

3. Within 2 minutes, press the WPS button on the BrosTrend extender.

4. Wait for the extender to automatically connect—the LED light will confirm the connection.

5. Once connected, the extender will use your existing Wi-Fi network settings.

✅ Note: If the WPS connection fails, use the manual configuration method below.

Method 2: LAN Cable

1. Connect one end of the Ethernet cable to the router’s LAN port and the other end to the extender’s Ethernet port.

2. Power on both devices.

3. You’ll need to configure the extender manually from your PC (see below).

Step 4: Configure BrosTrend Extender via Web Interface

If the WPS method didn’t work or you’re using a wired setup, you can configure the BrosTrend extender manually through your PC.

You have two ways to access the extender interface:

Option 1: Using the IP Address

1. Connect your computer to the BrosTrend extender’s Wi-Fi network.

2. Open a web browser and type 192.168.0.254 in the address bar.

3. Hit Enter and log in using the default credentials (usually admin/admin).

4. You’ll now have access to the extender’s dashboard to finalize your settings.

Option 2: Using the Web URL

1. Connect to the extender’s Wi-Fi network.

2. Open your browser and type re.brostrend.com.

3. Press Enter, then log in using the default username and password.

4. From here, follow the on-screen instructions to complete the Brostrend setup.

Final Thoughts

Setting up your BrosTrend WiFi extender with an Optimum router is quick and easy, whether you’re using the WPS method or doing a manual LAN cable setup. With the extender in place, you’ll enjoy stronger and more reliable Wi-Fi coverage throughout your home.

Still need help? Let me know and I’ll guide you through any specific step!